145/80R10 In Inches – Tire Size & Rim Fitment Guide

What size tire is 145/80R10 in Inches?

The 145/80R10 tire has an overall diameter of 19.1 inches, a section width of 5.7 inches, and can be mounted on 10 x 3.5-5.0 inches rim. The equivalent tire size in the high flotation system is 19.1x5.7R10.

Tire Diameter19.1486
Section Width5.7145
Rim Height10254
Sidewall Height4.6116
tire diameter
Tire Side
Tire Circumference
1054.1 Revs/Mile

To easy understanding, let us break down each component of the 145/80R10 tire size to know what these numbers represent and how they may affect your vehicle's performance:

How tall is a 145/80R10 tire?

A 145/80R10 tire has a height of 19.1 inches (486 mm). This is the measurement from the bottom to the highest point at the top of a tire through its exact center when inflated and no load.

Tire Diameter
Tire diameter: 19.1 In.

How wide is a 145/80R10 tire?

The 145/80R10 has a width of 5.7 inches (145 mm). This is the tire measurement at its thickest point, the distance between the inner sidewall’s and the outer sidewall’s widest point, also known as section width or tread width.

tread width
Tread width: 5.7 In.

145/80R10 sidewall height

The sidewall height of a 145/80R10 is 4.6 inches (116 mm). It’s measured from the rim to the outer edge of the tire's tread, expressed as a percentage of tire width.

sidewall height
Sidewall height: 4.6 In.

What size rim do I need for 145/80R10 tire?

You can put on a rim with a height of 10 inches and a rim width ranging from 3.5-5.0 inches for a 145/80R10 tire. (Based on recommendations of The Tire and Rim Association (TRA))

Putting very wide tires on narrow rims or vice versa can result in reduced performance of the tire.

Rim Diameter
Rim height: 10 In.
rim width
Rim width: 3.5-5.0 In.

145/80R10 circumference

The 145/80R10 tire has a circumference of 60.1 inches (1526.8 mm), This is the measurement of the distance the tire covers in one full rotation.

The tire circumference plays a crucial role in your vehicle's overall performance, affecting its speedometer accuracy, acceleration and fuel efficiency.

Circumference: 60.1 In.

145/80R10 Revolutions

The 145/80R10 performs 1054.1 revs/mile. Revolutions per mile indicate the number of times a tire rotates while it covers the distance of one mile.

1054.1 revs/mile

Alternative Tire Sizes for 145/80R10

As a rule, you can replace the tire within a 3% difference in tire diameter (height) of the OEM tire size. However, it should be considered as a general guideline, not a hard and fast rule. Here is a list of compatible tire sizes for 145/80R10:

Tire SizeDiameterRim (H x W)
105/80R1319.6″ (+2.6%)13″ x n/a
165/70R1019.1″ (Equal)10″ x 4.0-5.5″

More tire sizes for 10" Wheel:

19" Tire Diameter

145/80R10 = 19.1x5.7R10

165/70R10 = 19.1x6.5R10

155/80R10 = 19.8x6.1R10

*Disclaimer: The tire size is for information purposes only, the measurement is an approximation, as tire manufacturers can have slight variations in their measurements. It's recommended to refer to the vehicle manufacturer's guidelines or consult with a tire mechanic to determine the correct tire size for your vehicle.

Share on:

Leave a Comment