325/35R28 In Inches – Tire Size & Rim Fitment Guide


What size tire is 325/35R28 in Inches?

The 325/35R28 tire has an overall diameter of 37 inches, a section width of 12.8 inches, and can be mounted on 28 x 11.0-13.0 inches rim. The equivalent tire size in the high flotation system is 37x12.8R28.

InchesMillimeters
Tire Diameter37938.7
Section Width12.8325
Rim Height28711
Sidewall Height4.5113.8
Circumference116.12949
tire diameter
12.8"
37"
Tire Side
Tire Circumference
116.1"
28"
4.5"
545.7 Revs/Mile

To make it clear, we'll break down each part of the 325/35R28 tire size to know what these numbers represent & how they may affect your vehicle tire's performance:



How tall is a 325/35R28 tire?

A 325/35R28 tire has a height of 37 inches (938.7 mm). This is the measurement from the bottom to the highest point at the top of a tire through its exact center when inflated and no load.

Tire Diameter
Tire diameter: 37 In.


How wide is a 325/35R28 tire?

The 325/35R28 has a width of 12.8 inches (325 mm). This is the tire measurement at its thickest point, the distance between the inner sidewall’s and the outer sidewall’s widest point, also known as section width or tread width.

tread width
Tread width: 12.8 In.


325/35R28 sidewall height

The sidewall height of a 325/35R28 is 4.5 inches (113.8 mm). It’s measured from the rim to the outer edge of the tire's tread, expressed as a percentage of tire width.

sidewall height
Sidewall height: 4.5 In.


What size rim do I need for 325/35R28 tire?

You can put on a rim with a height of 28 inches and a rim width ranging from 11.0-13.0 inches for a 325/35R28 tire. (Based on recommendations of The Tire and Rim Association (TRA))

Putting very wide tires on narrow rims or vice versa can result in reduced performance of the tire.

Rim Diameter
Rim height: 28 In.
rim width
Rim width: 11.0-13.0 In.


325/35R28 circumference

The 325/35R28 tire has a circumference of 116.1 inches (2949 mm), This is the measurement of the distance the tire covers in one full rotation.

The tire circumference is important for your vehicle's overall performance, affecting its speedometer accuracy, acceleration & fuel efficiency.

Circumference
Circumference: 116.1 In.


325/35R28 Revolutions

The 325/35R28 performs 545.7 revs/mile. Revolutions per mile indicate the number of times a tire rotates while it covers the distance of one mile.

Revolutions
545.7 revs/mile


Alternative Tire Sizes for 325/35R28

As a rule, you can replace the tire within a 3% difference in tire diameter (height) of the OEM tire size. Here is the full list of replacement sizes compatible with 325/35R28:

Tire SizeDiameterRim (H x W)
305/25R3238″ (+2.6%)32″ x n/a
315/30R3037.4″ (+1.1%)30″ x 10.5-11.5″
255/30R3036″ (-2.8%)30″ x n/a

More tire sizes for 28" Wheel:

33″ Tire Diameter

37″ Tire Diameter

*Disclaimer: Please note that our tire dimensions & measurements are an approximation number, while the tire manufacturers may have different ways in calculating or rounding numbers. We recommend referring to the vehicle manufacturer's manual or checking with the tire technician to find out the correct tire size for your vehicle.


Share on:

Leave a Comment