355/40R24 In Inches – Tire Size & Wheel Fitment Guide


What tire size is 355/40R24 in Inches?

The 355/40R24 tire has an overall diameter of 35.2 inches, a section width of 14 inches, and can be mounted on 24 inches height of rim. The equivalent tire size in the high flotation system is 35.2x14R24.

InchesMillimeters
Tire Diameter35.2893.6
Section Width14355
Rim Height24610
Sidewall Height5.6142
Circumference110.52807.3
tire diameter
14"
35.2"
Tire Side
Tire Circumference
110.5"
24"
5.6"
573.3 Revs/Mile

To make it clear, we'll break down each part of the 355/40R24 tire size to know what these numbers represent & how they may affect your tire's performance:



How big is a 355/40R24 tire?

A 355/40R24 tire has a height of 35.2 inches (893.6 mm). This is the measurement from the bottom to the highest point at the top of a tire through its exact center when inflated and unloaded.

Tire Diameter
Tire diameter: 35.2 In.


How wide is a 355/40R24 tire?

The 355/40R24 tire has a width of 14 inches (355 mm). This is the measurement at its thickest point, the distance between the outer sidewall and the inner sidewall’s widest point, also called as tread width or section width.

You can put a slightly narrower or wider tire on a rim as long as it falls within the manufacturer's recommended tire width range.

tread width
Tread width: 14 In.


355/40R24 sidewall height

The 355/40R24 has a sidewall height of 5.6 inches (142 mm). It’s measured from the rim to the outer edge of the tire's tread, expressed as a percentage of tire width.

sidewall height
Sidewall height: 5.6 In.


What size rim do I need for 355/40R24 tire?

You can mount the 355/40R24 tire on a rim with a height of 24 inches.

Putting very narrow tires on wide rims or vice versa can result in reduced performance of the tire.

Rim Diameter
Rim height: 24 In.
rim width
Rim width: In.


355/40R24 circumference

The 355/40R24 tire has a circumference of 110.5 inches (2807.3 mm), This is the measurement of the distance the tire travels in one revolution.

The tire circumference is important for your vehicle's overall performance, affecting its speedometer acceleration, accuracy and fuel efficiency.

Circumference
Circumference: 110.5 In.


355/40R24 Revolutions

The 355/40R24 performs 573.3 revs/mile. Revolutions per mile indicate the number of times a tire rotates while it covers the distance of one mile.

Revolutions
573.3 revs/mile


Compatible Tire Sizes for 355/40R24

As a rule, you can replace the tire within a 3% difference in tire diameter (height) of the OEM tire size. However, it should be considered as a general guideline, not a hard and fast rule. Here is a list of compatible tire sizes for 355/40R24:

Tire SizeDiameterRim (H x W)
345/45R2436.2″ (+2.8%)24″ x n/a
255/30R3036″ (+2.2%)30″ x n/a
315/40R2635.9″ (+1.9%)26″ x 10.5-12.5″
375/40R2435.8″ (+1.7%)24″ x 12.5-15.0″
325/45R2435.5″ (+0.8%)24″ x 10.0-12.0″
275/25R3035.4″ (+0.6%)30″ x n/a
315/45R2435.2″ (Equal)24″ x 10.0-12.0″
335/35R2635.2″ (Equal)26″ x n/a
315/20R3035″ (-0.6%)30″ x n/a
315/40R2534.9″ (-0.9%)25″ x 10.5-12.5″
305/45R2434.8″ (-1.1%)24″ x 9.5-11.5″
335/40R2434.6″ (-1.7%)24″ x n/a
385/35R2434.6″ (-1.7%)24″ x 13.0-15.0″
295/45R2434.5″ (-2%)24″ x n/a
305/35R2634.4″ (-2.3%)26″ x n/a

More tire sizes for 24" Wheel:

28″ Tire Diameter

29″ Tire Diameter

30″ Tire Diameter


31″ Tire Diameter

32″ Tire Diameter

33″ Tire Diameter


34″ Tire Diameter

35″ Tire Diameter

36″ Tire Diameter

37″ Tire Diameter


*Disclaimer: Please note that our tire dimensions & measurements are an approximation number, while the tire manufacturers may have different ways in calculating or rounding numbers. We recommend referring to the vehicle manufacturer's manual or checking with the tire technician to find out the correct tire size for your vehicle.


Share on:

Leave a Comment