| Tire Size | Diameter | Rim (H x W) |
| 285/40R24 | 33″ (+2.7%) | 24″ x 9.5-11.0″ |
| 295/30R26 | 33″ (+2.7%) | 26″ x 10.0-11.0″ |
| 315/35R24 | 32.7″ (+1.8%) | 24″ x 10.5-12.5″ |
| 305/40R23 | 32.6″ (+1.5%) | 23″ x 10.0-12.0″ |
| 305/35R24 | 32.4″ (+0.9%) | 24″ x 10.0-12.0″ |
| 285/40R23 | 32″ (-0.3%) | 23″ x 9.5.0-11.0″ |
| 325/35R23 | 32″ (-0.3%) | 23″ x n/a |
| 405/25R24 | 32″ (-0.3%) | 24″ x 14.0-15.0″ |
| 255/30R26 | 32″ (-0.3%) | 26″ x 8.5-9.5″ |
| 305/25R26 | 32″ (-0.3%) | 26″ x 10.5-11.5″ |
| 285/35R24 | 31.9″ (-0.6%) | 24″ x 9.5-11.0″ |
| 335/30R24 | 31.9″ (-0.6%) | 24″ x n/a |
| 295/25R26 | 31.8″ (-0.9%) | 26″ x 10.0-11.0″ |
| 275/40R23 | 31.7″ (-1.3%) | 23″ x 9.0-11.0″ |
| 305/35R23 | 31.4″ (-2.2%) | 23″ x 10.0-12.0″ |
| 315/30R24 | 31.4″ (-2.2%) | 24″ x 10.5-11.5″ |
| 275/25R26 | 31.4″ (-2.2%) | 26″ x 10.0″ |
295/35R24 In Inches – Tire Size & Wheel Fitment Guide
What size tire is 295/35R24 in Inches?
The 295/35R24 tire has an overall diameter of 32.1 inches, a section width of 11.6 inches, and can be mounted on 24 x 10.0-11.5 inches rim. The equivalent tire size in the high flotation system is 32.1x11.6R24.
| Inches | Millimeters | |
| Tire Diameter | 32.1 | 816.1 |
| Section Width | 11.6 | 295 |
| Rim Height | 24 | 610 |
| Sidewall Height | 4.1 | 103.3 |
| Circumference | 100.9 | 2563.9 |
11.6"
32.1"
100.9"
24"
4.1"
627.7 Revs/Mile
To easy understanding, let us break down each component of the 295/35R24 tire size to know what these numbers represent and how they may affect your vehicle's performance:
How tall is a 295/35R24 tire?
The 295/35R24 tire has a width of 11.6 inches (295 mm). This is the measurement at its thickest point, the distance between the outer sidewall and the inner sidewall’s widest point, also called as tread width or section width.
How wide is a 295/35R24 tire?
The 295/35R24 tire has a height of 32.1 inches (816.1 mm). This is the measurement from the bottom to the highest point at the top of a tire through its exact center when inflated and unloaded.
295/35R24 sidewall height
The 295/35R24 has a sidewall height of 4.1 inches (103.3 mm). It’s measured from the rim to the outer edge of the tire's tread, expressed as a percentage of tire width.
What size rim do you need for 295/35R24 tire?
You can mount the 295/35R24 tire on a rim with a height of 24 inches and a rim width ranging from 10.0-11.5 inches. (Based on recommendations of The Tire and Rim Association (TRA))
Putting very narrow tires on wide rims or vice versa can result in reduced performance of the tire.
295/35R24 circumference
The 295/35R24 tire has a circumference of 100.9 inches (2563.9 mm), This is the measurement of the distance the tire travels in one revolution.
The tire circumference plays a crucial role in your vehicle's overall performance, affecting its speedometer acceleration, accuracy and fuel efficiency.
295/35R24 Revolutions
The 295/35R24 performs 627.7 revs/mile. Revolutions per mile indicate the number of times a tire rotates while it covers the distance of one mile.
Replacement Tire Sizes for 295/35R24
As a rule, you can replace the tire within a 3% difference in tire diameter (height) of the OEM tire size. However, it should be considered as a general guideline, not a hard and fast rule. Here is a list of compatible tire sizes for 295/35R24:
*Disclaimer: The tire size is for information purposes only, the measurement is an approximation, as tire manufacturers can have slight variations in their measurements. It's recommended to refer to the vehicle manufacturer's guidelines or consult with a tire mechanic to determine the correct tire size for your vehicle.